Hege druk Gas R11 Stainless Steel 3500psi helium gas regulator
R11 druk Regulator Valve
R11 Series RVS druk regulator stielen druk regulator is Single-stage diaphragms, fakuüm struktuer Stainless diaphragms útfier.It hat piston druk ferminderjen fan struktuer, konstante outlet druk, benammen brûkt foar hege ynfier druk, geskikt foar suvere gas, standert gas, corrosive ensfh
Technyske gegevens fan Helium Gas Regulator
| 1 | Max ynlaat druk | 500, 3000 psi |
| 2 | Outlet druk | 0~25, 0~50, 0~100, 0~250, 0~500 psi |
| 3 | Bewiis druk | 1,5 kear fan maksimale rated druk |
| 4 | Wurktemperatuer | -40°F-+165°F (-40°C-+74°C) |
| 5 | Leakage rate | 2*10-8 atm cc/sek He |
| 6 | Cv | 0.08 |
Produkt parameter
De wichtichste skaaimerken fan Gas Regulator
| 1 | Single-stage ferminderje Struktuer. |
| 2 | Brûk hurde seal tusken lichem en diafragma |
| 3 | Body Thread: 1/4" NPT (F) |
| 4 | Maklik te sweep binnen it lichem |
| 5 | Filter mesh binnen |
| 6 | Panel mountable of muorre mounted |
Typyske applikaasjesfan Gas Regulator
| 1 | Laboratoarium |
| 2 | Gas Chromatograaf |
| 3 | Gas Laser |
| 4 | Gas bus |
| 5 | Oalje en gemyske yndustry |
| 6 | Tested ynstrumintaasje |
bestelynformaasjefan Gas Regulator
| R11 | L | B | B | D | G | 00 | 02 | P |
| Ûnderdiel | Body Materiaal | Body Hole | Ynlaat druk | Outlet druk | Drukmeter | Inlet grutte | Outlet grutte | Merk |
| R11 | L:316 | A | D: 3000 psi | F: 0-500 psig | G: Mpa gauge | 00:1/4″NPT(F) | 00:1/4″NPT(F) | P: Panel mounting |
| B: Koper | B | E: 2200 psi | G: 0-250 psig | P: Psig/Bar Guage | 01:1/4″NPT(M) | 01:1/4″NPT(M) | R: Mei oerlêstklep | |
| D | F: 500 psi | K: 0-50 pisg | W: Gjin mjitte | 23:CGGA330 | 10:1/8" OD | N: Needle keal | ||
| G | L: 0-25 psig | 24:CGGA350 | 11:1/4" OD | D: diafragmaklep | ||||
| J | 27:CGGA580 | 12:3/8" OD | ||||||
| M | 28:CGGA660 | 15:6mm OD | ||||||
| 30:CGGA590 | 16:8mm OD | |||||||
| 52:G5/8″-RH(F) | ||||||||
| 63:W21.8-14H(F) | ||||||||
| 64:W21.8-14LH(F) |
Skriuw jo berjocht hjir en stjoer it nei ús
